Selector software update

The selector software can be updated as follows:

Using a PC connected to the RJ45 connector in the service port and web interface update function.

The update process can take between 2-10 minutes.

Ensure that enough battery capacity is available when doing a software update to a battery powered selector. The battery indicator shall show at least one white steady LED bar.

Selector software upgrade from a PC

Disconnect all power from the selector.
Open the service port cover on the selector. The cover is secured by a 2 mm allen screw.
Connect an ethernet cable between a PC and the RJ-45 connector in the service interface.
Verify that the RBU is correctly inserted into the SD card slot, or insert the card.
Connect power to the selector by connecting an external power supply or by connecting a battery.
Open a web browser window in the PC.
Type the web address 169.251.1.1 and press the Enter key. The web server in the selector will respond and show the selector web interface.
Select the Settings icon in the left menu bar. The settings workspace shows the configuration menus.
In the Service port menu, click the Update command button.

A shortcut window opens to browse for the software update file.
Select a file with the extension *.gbs and click OK.

New software is loaded.

During software loading, the red LEDs display a progress bar of the process.
Remove the Ethernet cable.
Close the service port.

The configuration settings stored in the RBU are not affected by a software update.