1. Selector 6
2. Installation
3. Installation requirements
4. Installation options and drill patterns

Installation options and drill patterns

The installation options and the drill patterns are applicable to all the selector versions for both wired and wireless applications.

The selector has the following installation options:

• Fixed installation, mounted on a vertical surface.

• Mobile installation with a protective cover and/or carry handle.

• Fixed installation, mounted from above.

• Fixed installation, mounted from below.

Installing options from the backside

A	Oval holes, accessible from above or from below (up to M6)	B	Threaded M4 holes, accessible from below
C	socket holder fastening screws	D	Groove into which M4 square nuts can slide

The backside of the selector has a groove into which square M4 nuts can slide for mounting the selector from the backside.

A DIN rail adapter is available as a selector accessory that can be fastened into the groove.

Mobile installations

For mobile installations, the following selector accessories are available:

• A carry handle kit. Mounted into the grove on the backside of the selector.

• A protective cover. The selector is placed in a protective cover to avoid scratching other surfaces and to increase the selector's robustness.

Installing on a horizontal surface from above or from below

A	Distance between oval holes, accessible from above or from below	B	Distance between threaded M6 holes, accessible from below
C	Distance between oval holes, accessible from above or from below	D	Distance between threaded M6 holes, accessible from below

Each corner has an oval shaped hole 6 x 15 mm, for mounting the selector to a surface from above.

Each corner has a threaded M4 holes for mounting the selector to a surface from below.

All dimensions are given in mm.