Disassembling the gearbox
Required tools
Allen keys or bits 4-10 mm
Screw bits and sockets
Torx® keys or bits T6-T25
Torque wrench
Lifting device
Screwdrivers
Pliers
Bearing puller (optional)
Feeler gauge
Lubricant | Description |
|---|---|
Klüberlub® BE 71-501 | http://www.klueber.com/en/product-detail/id/404/ |
Remove the screws holding the connector cover.
Disassemble the connector cover.
Disconnect the load cell cable from the motor cable.
Fix the press over the gear box in a vice using soft jaws.
Disassemble the brake pic. 2-3 (CBUL press only).
Unscrew the top cover screws.
Remove the top cover by screwing long screws through the threaded holes.
Remember the position of the guide rings and the preload washers. The preload washers can be placed in the top cover.
Disassemble the guide rings and the preload washers.
Disassemble the gear wheels, axis and bearings.
Disassemble all bearings (x6) using a bearing puller (pic. 10-11).
