Changing a HAD socket bit

Remove HAD Socket Bit

  1. Remove the two T8 screws.

  2. Remove the socket from the inline front part.

  3. Remove the bit from the bit holder.

Insert HAD Socket Bit

  1. Place the bit in the bit holder and secure it with a set screw.

  2. Place the socket on the inline front part.

  3. Tighten the two T8 screws. Make sure that the screws enter the holes on the output shaft of the inline front part.

GFA-HIT | Show Product Numbers

3513000944 3513000040 3513000041 3513000042 3513000976 3513000909 3513000916 3513001045 3513000979 3513001104 3513001106 3513001280 3513000051 3513001418 3513001228 3513001229 3513001219 3513001543 3513001701 3513001901 3513001900 3513002064 3513002347 3513002348 3513002349 3513002374 3513002379 3513001105 3513002265 3513002522 3513002519 3513002088 3513002087 3513002666 3513000912 3513003048 3513003087 3513002895 3513002894 3513002831 3513003360 3513003300

Published: 2026-04-16

© 2026 Saltus Industrial Technique AB