Replace the rail

WARNING

Turn OFF the power supply before starting replacement and adjustment.

If there is any dirt or flaw on the rail groove that prevents a smooth operation. we recommend the user clean or replace the rail. Use the passing plate, rail and escaper that correspond to the diameter of the screws loaded.

NOTICE

Remove any screws that were loaded in the chamber before doing any replacing and adjusting.

Loosen the rail fixing screws.
Pull out the rail assembly from the rear of the machine.
Insert the new rail from the rear of the machine.
Fasten the rail with the fixing screws.
Adjust the rail according to the procedure in the installation section.