Check and adjust the timer
The screw transport speed differs depending on the screw type. This machine uses a timer to make screw unloading smooth.
For screws with a low transport speed, set a longer time.
For screws with a high transport speed, set a shorter time.
Check the operation by intercepting the optical axis of the sensor.
Make an adjustment with the timer knob at the rear of the machine body.
When the timer knob is turned clockwise, as viewed from the rear side, the time becomes shorter.
When the knob is turned counterclockwise, the time becomes longer
Check this adjustment, by using the screwdriver, within the allowable turning range, without using excessive force.
Do an operational check with screws loaded in the scooping chamber and the timer set properly.
