Check and adjust the rail vibration

The screw transport speed differs depending on the screw type.

Check the screw transport speed. If the rail vibration hinders a smooth transport of the screws, it needs adjustment.
Loosen the anti-vibration screw (A) at the rear of the machine
Turn the vibration adjusting screw (B) located on the bottom of the machine, to adjust the vibration.
- When the screw (B) is turned clockwise, as viewed from the bottom of the machine, the vibration will increase
- When the screw (B) is turned counterclockwise, the vibration decreases
NOTICE
If the vibration is adjusted to a too large value to increase the transport speed, the rail will hit against the escaper and screws may fall into the machine from the clearance, failing to unload screws normally. Adjust the vibration to a proper value that matches the loaded screws
After adjustment, be sure to tighten the anti-vibration screw (A).
Do an operational check.