Assembling the Panel PC

Only qualified personnel shall assemble and operate the Panel PC.
Only suspended or standing assembly with standard screen of the Panel PC is permitted. Vertical screen orientation is not permitted.

Assemble the Panel PC as follows:

Loosen the two screws on the connection console cover.
Partly install the two bottom screws first. The original size of these screws is M6×18 mm.
The distance between the Panel PC and the screw head should be around 13 mm.
Hook the Panel PC on to the corresponding holes in the console.
Install the two upper screws and tighten them including the two bottom screws.
Connect all cables to the Panel PC and put the connection cover back in position.

Suspended Assembly

Raised Assembly