Analysis
Analysis is used for viewing graphs. It is possible to analyze stored graphs on the controller or PC. It is also possible to view a real time trace while the tightening/measurement is ongoing. This is however only available if the controller is connected via USB.
The sample rate and number of sample points for each stored graph varies depending on the tightening duration.
Sample rate * Duration = Sample points
Data sample rate (Hz) | Max Duration |
|---|---|
7500 | 0.133333333 |
3750 | 0.266666667 |
1875 | 0.533333333 |
937.5 | 1.066666667 |
468.75 | 2.133333333 |
For example, if a tightening takes 0.52 seconds, the sample rate is 1875 Hz. This results in 1875 * 0.52 = 975 sample points.
GUI object | Action |
Stop | Stops analysis from collecting/receiving real time traces. |
Start | Starts the analysis. Each tightening starts a new graph. |
Value table | Displays the graph in a table. |
Clear | Erases the graph(s). |
Open | Opens an earlier saved graph. |
Save | Saves the displayed graph as a .dia file. |
Export | Export the results to a .jpg- or .bmp-file . |
Settings | Changes the analysis functions. Selected in three tabs.
|
Test | Opens a window that enables you to run the tool from ToolsTalk MT. |
Path | Path to the working folder. The .dia- or .mtg-files in the selected folder are displayed. |
Show multiple traces | Show multiple traces. Print up to 8 graphs. |
Refresh | Press to update the working folder/path. |
.dia- and .mtg-files | The .dia- and .mtg-files in the selected working folder are displayed. |
