Vertical installation front mounting

NOTICE

Do not let the press piston rod support the press weight during service or repairs.

Axial force on the PST press piston rod may completely damage the load cell.

Press	Front mounted
PST 5	M8 (4x)
PST10	M8 (4x)
PST20	M8 (8x)
PST35	M10 (8x)
PST50	M10 (8x)
PST60	M10 (8x)
PST100	M12 (8x)

Required tools

Allen keys or bits 4-10 mm
Screw bits and sockets
Torx® keys or bits T6-T25
Torque wrench
Lifting device
Screwdrivers
Pliers
Bearing puller (optional)
Feeler gauge

Assembly

Fit a lifting eye in the rear end of the press, see dimensional drawings in ServAid.
Unscrew the screws in the front end of the press.
Lift the press to a vertical position.
Assemble the press to the mounting plate using new longer screws.
See dimensional drawings in ServAid for the screw length.