Running an Operation in Track Mode
This mode can be used to perform a simple tightening operation while monitoring in real time the applied torque and the angle rotation.
Use the Navigation buttons to cycle through the main menu items to the Free Mode menu.
Press the Select button to open the Free Mode menu.
Press the Select button to start the Track Mode operation.
Apply torque either clockwise (positive torque) or counterclockwise (negative torque): the STRwrench EHMI will display in real time the values of the applied torque and of the angle rotation.
To set the zero point at a given torque value, press the Select button. The zero point is valid only for the current Track Mode operation and not as general reference for all operations performed by the STRwrench.
To exit the track mode operation, press the Back button.
