Adjusting the Pulsing Power
The AutoTrim valve is factory set to full pulsing power, that is, the length of N is set according to the table below.
To improve accuracy (more pulses before shut off) on hard or medium hard joints, reduce the power. The power is reduced by turning the nut (1) clockwise (increased lenght of N).
AutoTrim Valve | Length of N (mm) |
|---|---|
4250 1878 43 | 1.5 |
4250 1878 90 | 1.5 |
4250 1878 91 | 1.0 |
4250 1878 92 | 0.5 |
4250 1878 93 | 0 |
4250 1878 94 | 0 |
4250 1878 95 | 0 |
4250 1878 97 | 1.5 |
4250 1878 98 | 1.0 |
4250 2675 91 | 0 |
4250 2675 92 | 0 |
4250 1878 50 | 2.0 |
4250 1878 51 | 2.0 |
