USB host

Type A receptacle.

Supports:

Full speed, 12 Mbps
Low speed, 1.5 Mbps

If you connect an accessory in this connection the controller will be the host and control the accessory.

Only supports USB flash drive with filesystem FAT32.

Connect a USB hub

It is possible to connect an USB hub with up to 4 ports to the USB host port.
The total max current of the connected devices is 900 mA. If more current is needed, connect an external power supply.
The USB hub can have two scanners connected at the same time if their total max current is less than 900mA.

Only scan with one scanner at the time when two scanners are connected.

Do not connect more than one USB flash drive, since only one USB flash drive can be detected by the MTF 6000.