Adding a User
On the home menu, tap Configuration.
On the Configuration page, tap Main Data.
Tap User.
On the upper-right corner of the User page, tap Add button to add new user.
In General category of the Add user page, configure the following parameters:
Username: enter the user name. This name will be used for the login.
Password: enter the password used for the login of the user.
Confirm password: enter again the password.
If the string entered in the Password text box and Confirm password text box are different, the Confirm password text box is red highlighted.
First name: enter the name of the user.
Last name: enter the last name of the user.
Has password: select the check box to require the password at the user login.
If the Has password check box is not selected, at the Login the user must leave empty the password text box. This case is useful to have the traceability of the results without the password request at the login.
Assign User Role:
Role: Select the role for the user profile.
The user role defines the authorization given to user. All users can use the system.
The admin user can:
Configure general settings (described in “General Settings” section).
Configure external systems (described in “External systems” section).
Configure Users (described in the “Users” section).
Configure maintenance operations (described in the “Maintenance” section).
Configure Network setting (described in the “Network Setting” section).
These menus are disabled for the operator user.
User Enabled: select the checkbox to enable the user profile.
If the user profile is disabled, the account cannot access the device.
Only Admin users have access to General Settings, External Systems, Users, Maintenance sections.
On the upper-right corner of the Add user page, tap the Save button to add the new user.
