Configuring the ToolsNet Connection
On the sidebar menu, select Configuration
.On the Configuration page top bar, select External Systems > ToolsNet.
In the upper-right corner of the ToolsNet tab, select Edit.
Under General, select Enabled.
Under PIM, enter the following parameters:
Parameter
Description
Address
Enter ToolsNet server IP address.
Port
Enter ToolsNet server port.
Default value: 9014; value range: 1 - 65535.
Under Configuration, enter the following parameters:
Parameter
Description
Station number
Enter the number that ToolsNet must associate to the results collected by STRwrench.
Value range: 1 - 9999.
Station name
Enter the name that identifies STRwrench in ToolsNet tree structure.
Send traces
Select the checkbox to enable the device to send traces to ToolsNet
In the upper-right corner, select Apply.
For further information on how to use ToolsNet 8, refer to ToolsNet 8 User Guide.
