Viewing Tool Information

The Tool category lists the following information on the measuring device:

Information	Description
Model	Measuring device model denomination.
Serial Number	Measuring device serial number. It may be needed for the correct spare parts list or for service instructions.
Product Number	Measuring device product number.

The smartHEAd category lists the following information on the smartHEAD:

Information	Description
Model	smartHEAD model denomination.
Serial Number	smartHEAD serial number. It may be needed for the correct spare parts list or for service instructions.
Maximum Torque	smartHEAD torque capacity.
Product Number	smartHEAD product number.

Tap TAG to view the following information on the TAG:

Information	Description
TAG ID	TAG number.
Torque Correction Coefficient	Torque correction coefficient defined for the TAG.
Angle correction	Angle correction defined for the TAG.
Nominal torque	Torque at which the Angle correction is defined.

The Maintenance category lists the following information on the transducer:

Information	Description
Is transducer overloaded?	Yes - the transducer has been overloaded. No - the transducer has not been overloaded.
Highest torque value	Highest torque output measured by the transducer.
Highest torque date	Date and time when the highest torque output was measured by the transducer.
Angle correction	Angle correction coefficient for the smartHEAD due to the wrench bending. Note that this coefficient is related to the torsion of the smartHEAD itself. When a wrench extension is used, its angle correction coefficient must be calculated and added to the end fitting tool or program parameters. For further information, refer to How to Calculate the Angle Correction.
Transducer calibration date (CW)	Date of the last torque calibration in clockwise direction.
Gyro calibration date (CW)	Date of the last gyroscope calibration in clockwise direction.
Transducer calibration date (CCW)	Date of the last torque calibration in counterclockwise direction.
Gyro calibration date (CCW)	Date of the last gyroscope calibration in counterclockwise direction.
Next calibration date	Date of the next calibration expiration.
Number of measurements	Number of measurements performed by the transducer so far.