Viewing Result
On the home menu, tap Results.
On the Result details page, the following result details are listed:
General category:
Information
Description
Inspection name
Name of the inspection.
Inspection type
Type of inspection:
Cp/Cpk
SPC
Strategy
Strategy applied to the inspection:
Residual Torque/Angle
Residual Torque/Peak
Residual at Angle
Minimum Torque
Minimum After Breakaway
Intersection
Pitch Change
Date
Date and time when the inspection has been run.
Inspected object
Name of the inspected object.
Status
Inspection status:
Completed - all required samples have been acquired.
Partial - the number of samples is not completed or is equal to 0.
Abandoned - the inspection/joint has been deleted or the parameters that reset the statistics have changed.
Result
Inspection result:
OK
NOK
Empty field (the inspection status is either partial or abandoned).
Measuring device
Model of measuring device used fo the inspection.
Measuring device S/N
Serial Number of the measuring device used fo the inspection.
Transducer
Model of transducer used fo the inspection.
Transducer S/N
Serial Number of the transducer used fo the inspection.
