1. Screw Feeding System
2. Declarations
3. EU Declaration of Conformity

EU Declaration of Conformity

This document serves as a supplement to the original product and safety information of the components listed here and certifies the system conformity of the Screw Feeding System according to applicable regulations. We point out that a product-related declaration of conformity is available in the respective manual for all products mentioned below. Atlas Copco Industrial Technique AB hereby certifies system conformity of the Atlas Copco Screw Feeding System as a hand-held or hand-guided system which consists of several units that, when combined, form a functional system. This system allows to perform tightening operations with pneumatic screw feeding. The main components are the Screw Feeding Unit, the hand-held Screw Feeding Tightening Module and the Power Focus 6000 controller.

The existing system can also be extended with complementary components from the Atlas Copco portfolio, if required. These include the ergonomic torque arms, weight-compensating spring balancers and quality accessories, such as the ILG positioning system and an industrial Touch PC with user interface connected with the corresponding intelligent controls of the Power Focus family as well as the original Atlas Copco accessories and tool cables from the current catalogue Atlas Copco Industrial Tools and Solutions. The original Atlas Copco accessories to be used or with which the system can be supplemented are listed and assigned accordingly in the catalogue. Any further modifications or conversions are not permitted.

The Screw Feeding System consists of:

in combination with:

The Screw Feeding System can also be extended with following Atlas Copco components:

The Screw Feeding System can also be extended with the original Atlas Copco accessories from the catalogue Atlas Copco Industrial Tools and Solutions. The original Atlas Copco accessories are listed in the catalog on the pages Additional Accessories - Tensor in the chapter Tensor Tools, and the components listed in the chapter Quality Integrated Fastening.

Year of manufacture: starting from 2021

The Screw Feeding System is in conformity to the following relevant EC-Directives:

• Machinery Directive 2006/42/EEC including amendments and additions

• Low Voltage Directive 2014/35/EU including amendments and additions

• EMC-Directive 2014/30/EU including amendments and additions

• RoHS-Guideline 2011/65/EU, including amendments and additions

• The Radio Equipment Directive 2014/53/EU (RED)

Most important applied harmonized standards:

DIN EN ISO 12100, DIN EN 60204-1, EN 61010-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-6-3, DIN EN 61326-1, EN 301489-17, EN 301 489-1 V2.2.1, EN 301 489-3 V2.1.1, EN 301 489-17 V3.2.0, EN 300 328 V2.1.1, EN 301 893 V2.1.1, EN 300 440 V2.1.1, EN 50385:2017

Most important applied national:

ProdSG, 9.ProdSV, 1.ProdSV, EMVG standards

Vibration and noise emission values:

Sound pressure level <75 dB (A), uncertainty - dB (A), in accordance with ISO15744. Sound power level – dB (A) uncertainty - dB (A), in accordance with ISO15744. Vibration total value 2.5 m/s2, uncertainty, in accordance with ISO28927-2.

Intended use of the product:

The tightening systems are intended exclusively for commercial use. These products are only intended for industrial use and may only be used in closed, dry rooms, but not in explosive environments.

Authorities can request relevant technical information from:

Product Compliance Manager, Atlas Copco Industrial Technique AB, S-105 23 Stockholm Sweden

Name and Position of issuer:

Håkan Andersson, Managing Director

Signature of issuer

Place and date of issue: Stockholm, 1 September 2023