1. Fixtured Tightening Module
2. Maintenance Instructions
3. Replacing the Alignment Jaws

Replacing the Alignment Jaws

Follow the below steps to replace the Alignment Jaws.

• The Alignment Jaws must be replaced in case of wear or damage.

  

• Disassemble the Feeding Head by releasing the clamps and removing the stud.

• Replace the Alignment Jaws and assemble the Feeding Head.

• Using the alignment jaw device and the pin punch to drive the pins out.

  

• Replace the front part of the alignment jaws and use the alignment jaw device to hold the parts together when driving the pins back in.