Tools and Mounting Devices
Required Standard Tools and Specifications
No. | Tools | Specifications |
1 | Allen key | 1,5; 2, 2,5; 3; 4; 5; 6; 7; 8; 9; 10 (mm) |
2 | Wrench | 5; 7; 8; 10; 13; 14; 17; 19; 22; 24; 26 (mm) |
3 | Screw Driver | Set of Screw Drivers |
4 | Diagonal Cutter | |
5 | Torque Wrench | Up to 50 Nm |
6 | Grease Gun | For guide block greasing |
7 | Hot Air Gun | T=130°C |
8 | Tube cutting tool | 4 to 35 mm |
Required Mounting Devices and Description
Mounting Devices | Description |
Adjustable Hook Wrench | Tool for changing the Bit adaptor, Bit, and union nut of the stroke module. |
Alignment Jaw Fixture | Device for fixing the tension pins with which fasten the alignment jaws to the holder. There are 2 holders and 2 mounting sides for the alignment jaws with different sizes:
|
Pin Punch | Tool for dismounting the tension pins which hold the alignment jaws in the holders. |
Holder with the spline | Holder with the spline is used to change the Bit. During Bit-change, the adaptor should be clamped securely. |
