Open Protocol
On the left side of the Toolbar, tap the Menu icon (
) > Configuration > External system > Open Protocol.
Enabled: select the checkbox to enable the Open Protocol communication.
By default, the Enabled checkbox is not selected.
Open Protocol Port: default port used for Open Protocol communication.
Tap on the Save icon to save the configuration.
Below are the available MIDs (Message Identification):
MID | Description | Revision ranges |
|---|---|---|
0001 | Communication start | 0 ÷ 1 |
0002 | Communication start acknowledge | 0 ÷ 5 |
0003 | Communication stop | 0 ÷ 1 |
0004 | Command error | 0 ÷ 1 |
0005 | Command accepted | 0 ÷ 1 |
0010 | Pset ID upload request | 0 ÷ 1 |
0011 | Pset ID upload response | 0 ÷ 1 |
0014 | Pset selected subscribe | 0 ÷ 1 |
0015 | Pset selected | 0 ÷ 2 |
0016 | Pset selected acknowledge | 0 ÷ 1 |
0017 | Pset selected unsubscribe | 0 ÷ 1 |
0018 | Select Pset | 0 ÷ 1 |
0060 | Last tightening result data subscribe | 0 ÷ 1 |
0061 | Last tightening result data | 0 ÷ 7 (+999) |
0062 | Last tightening result data acknowledge | 0 ÷ 1 |
0063 | Last tightening result data unsubscribe | 0 ÷ 1 |
0064 | Old tightening result upload request | 0 ÷ 1 |
0065 | Old tightening result upload response | 0 ÷ 6 |
0080 | Read time upload request | 0 ÷ 1 |
0081 | Read time upload response | 0 ÷ 1 |
9999 | Keep alive message | 0 ÷ 1 |
