1. ToolsTalk 2
2. Configuration
3. Configuration for PF6000 and PF8
4. Working with the Tightening Program Tab
5. Step Configuration Stages
6. Stage Parameter Descriptions
7. Target Torque Limits

Target Torque Limits

By setting the Target torque limits, it is possible to discard a tightening should the torque result not fall within the specified torque limits. A torque set too high can cause the bolt to deform, break, or even strip the thread as a result of passing the yield point. Not enough torque can result in the clamping force not being sufficient to withstand the forces for which the joint is designed.