Compatibility Matrix
All versions of ToolsTalk 2 software are backwards compatible unless stated otherwise
ToolsTalk2 | PF6 FlexSystem | PF6000 | PF6000 Synchronized tightening | Atlas Copco Data Communication Version | IXB | PF8 | PF8 Synchronized tightening | Tools Control |
|---|---|---|---|---|---|---|---|---|
2.3 | N/A | 2.0, 2.1, 2.1.1, 2.3 | N/A | N/A | N/A | N/A | N/A | N/A |
2.4 | N/A | 2.4 | N/A | N/A | N/A | N/A | N/A | N/A |
2.5 | 1.2 | 2.4 | N/A | N/A | N/A | N/A | N/A | N/A |
2.6 | 1.2 | 2.5 | N/A | N/A | N/A | N/A | N/A | N/A |
2.7 | 1.3 | 2.6 | N/A | N/A | N/A | N/A | N/A | N/A |
2.7.1 | 1.3.1 | 2.6 | N/A | N/A | N/A | N/A | N/A | N/A |
2.8 | 1.3.1 | 2.7 | N/A | N/A | N/A | N/A | N/A | N/A |
2.9 | 2.0 | 2.7 | N/A | N/A | N/A | N/A | N/A | N/A |
2.11 | 2.1 | 2.8 | N/A | N/A | N/A | N/A | N/A | N/A |
2.12 | 3.0 | 3.0 | 3.0 | N/A | N/A | N/A | N/A | N/A |
2.13 | 3.1 | 3.1.1 | 3.1.1 | 1.7 | N/A | N/A | N/A | N/A |
2.14 | 3.3 | 3.3 | 3.3 | 1.9 | 3.3 | N/A | N/A | N/A |
2.15 | 3.4 | 3.4 | 3.4 | 1.11 | 3.4 | N/A | N/A | N/A |
2.16 | 3.5 | 3.5 | 3.5 | 1.13 | 3.5 | 3.5 | 3.5 | N/A |
2.17 | 3.6 | 3.6 | 3.6 | 2.1.3 | 3.6 | 3.6 | 3.6 | N/A |
2.18 | 3.7 | 3.7 | 3.7 | 2.2.2 | 3.7 | 3.7 | 3.7 | N/A |
2.19 | 3.8 | 3.8 | 3.8 | 2.4 | 3.8 | 3.8 | 3.8 | N/A |
2.20 | 3.9 | 3.9 | 3.9 | 2.5 | 3.9 | 3.9 | 3.9 | N/A |
2.21 | 3.10 | 3.10 | 3.10 | 3.0 | 3.10 | 3.10 | 3.10 | 3.6–3.10 |
2.22 | 3.11 | 3.11 | 3.11 | 3.0 | 3.11 | 3.11 | 3.11 | 3.6–3.11 |
ToolsTalk 2 can run with higher versions of Atlas Copco Data Communication. The Atlas Copco Data Communication version mentioned in the matrix is to be considered as the lowest version the ToolsTalk 2 software is compatible with.
