Import Controller Configuration
This menu is visible if the Scheduled task type is Import controller configuration.
Menu item | Description |
|---|---|
File name | The file and name must be a previously exported configuration file. It must be in the format : *.tar.gz |
Browse | The command opens the browser window to locate the file to import. |
The file is loaded into ToolsTalk 2 and the scheduled task runs at the scheduled times.
A file import does not change the program of the controller. It changes every setting and configuration except the factory IP address.
A scheduled file import can only occur if the controller is online at the time of the import.
Parameter | Description |
|---|---|
Enabled | When set to Yes, the scheduled task will run according to the scheduled configurations. When set to No, the scheduled task will not run. |
Weekdays | Mark one or more weekdays when the task will run. |
Time | Select a run time from the drop-down menu. |
Start date | Select a start date for the run time from the calender icon. |
Select end date | When set to Yes, the scheduled task will run according to the schedule until the end date. When set to No, the scheduled task will run according to the schedule from the start date. |
After a task is executed, the results are shown in the Results menu.
Parameter | Description |
|---|---|
Status | The scheduled task status after running the task can show OK or NOK. |
Controller | Displayed if available for the task. |
Latest run | Time and date when the scheduled task was executed. |
Error | Error code examples if the status is NOK.
|
