Installing the Station Setup Application
The condensed Station Setup installation has full controller configuration functionality, but also some limitations:
The entire installation has a smaller footprint and is installed on a portable computer.
Only one physical controller can be managed at a time.
The computer is connected to the service port of the controller to avoid interruption of normal activity.
Applications
The typical application for this mode of operation can be the following:
A controller can be accessed using ToolsTalk 2 without connecting to the customer network but instead using the service port of the controller.
Offline configuration of controllers using the controller library features. The configuration file can later be transferred to a real controller for verification.
An easy export of a controller configuration that is very helpful in debugging tasks.
Before you begin with the ToolsTalk 2 Station Setup installation, make sure all the requirements are met as described in section Before installing or Upgrading.
Save the executable file ToolsTalkStationSetup<xxx>.exe in a desired folder on your computer. The <xxx> represents the version of the file.
Double-click on the executable file.
Select Yes on Do you want to allow this app to make changes to your device?
Select Next in the Atlas Copco Tools Talk Server - InstallShield Wizard window to continue.
Read and then select I accept the terms in the license agreement. Select Next to continue.
Select Print if you would like to print the license agreement.
Select Change... to install the application in a different location. The default location is C:\Program Files (x86)\Atlas Copco\ToolsTalk StationSetup\
Select Next to continue.
Select Install to finish the installation.
A shortcut of the ToolsTalk2 application will appear on the desktop.
Enter the parameters in the Server Settings tab and select Save.
Make sure that the controller port you enter is open and is possible to connect to!
The ToolsTalk 2 application is available in the start menu.
