Matriz de compatibilidades
Todas las versiones anteriores del software ToolsTalk 2 son compatibles a menos que se indique lo contrario
ToolsTalk2 | PF6 FlexSystem | PF6000 | Apriete sincronizado PF6000 | Versión Atlas Copco Data Communication | IXB | PF8 | Apriete sincronizado PF8 | Tools Control |
|---|---|---|---|---|---|---|---|---|
2.3 | N/D | 2.0, 2.1, 2.1.1, 2.3 | N/D | N/D | N/D | N/D | N/D | N/D |
2.4 | N/D | 2.4 | N/D | N/D | N/D | N/D | N/D | N/D |
2.5 | 1.2 | 2.4 | N/D | N/D | N/D | N/D | N/D | N/D |
2.6 | 1.2 | 2.5 | N/D | N/D | N/D | N/D | N/D | N/D |
2.7 | 1.3 | 2.6 | N/D | N/D | N/D | N/D | N/D | N/D |
2.7.1 | 1.3.1 | 2.6 | N/D | N/D | N/D | N/D | N/D | N/D |
2.8 | 1.3.1 | 2.7 | N/D | N/D | N/D | N/D | N/D | N/D |
2.9 | 2.0 | 2.7 | N/D | N/D | N/D | N/D | N/D | N/D |
2.11 | 2.1 | 2.8 | N/D | N/D | N/D | N/D | N/D | N/D |
2.12 | 3.0 | 3.0 | 3.0 | N/D | N/D | N/D | N/D | N/D |
2.13 | 3.1 | 3.1.1 | 3.1.1 | 1.7 | N/D | N/D | N/D | N/D |
2.14 | 3.3 | 3.3 | 3.3 | 1.9 | 3.3 | N/D | N/D | N/D |
2.15 | 3.4 | 3.4 | 3.4 | 1.11 | 3.4 | N/D | N/D | N/D |
2.16 | 3.5 | 3.5 | 3.5 | 1.13 | 3.5 | 3.5 | 3.5 | N/D |
2.17 | 3.6 | 3.6 | 3.6 | 2.1.3 | 3.6 | 3.6 | 3.6 | N/D |
2.18 | 3.7 | 3.7 | 3.7 | 2.2.2 | 3.7 | 3.7 | 3.7 | N/D |
2.19 | 3.8 | 3.8 | 3.8 | 2.4 | 3.8 | 3.8 | 3.8 | N/D |
2.20 | 3.9 | 3.9 | 3.9 | 2.5 | 3.9 | 3.9 | 3.9 | N/D |
2.21 | 3.10 | 3.10 | 3.10 | 3.0 | 3.10 | 3.10 | 3.10 | 3.6–3.10 |
2.22 | 3.11 | 3.11 | 3.11 | 3.0 | 3.11 | 3.11 | 3.11 | 3.6–3.11 |
2.24 | 3.13 | 3.13 | 3.13 | 3.4 | 3.13 | 3.13 | 3.13 | 3.6–3.13 |
2.25 | 3.14 | 3.14 | 3.14 | 3.5 | 3.14 | 3.14 | 3.14 | 3.6–3.14 |
ToolsTalk 2 puede funcionar con versiones posteriores de Atlas Copco Data Communication. La versión de Atlas Copco Data Communication mencionada en la matriz se debe considerar como las versión más antigua con la que es compatible el software ToolsTalk 2.
