Adding a Sync Mode

Adding a Sync Mode for Tightening

In the Plant Structure window, select a controller from the list.
On the Menu bar, select the Sync Mode tab. The workspace area shows a list of all the current sync modes.
Select the Add command button. The Create a new Mode dialog box opens.
Issue the new Sync Mode with a name and optionally an index number.
In Operation mode, choose Tightening.
Select Add to add the new Sync Mode.
In Properties, issue the Sync Mode with a description and select the relevant Loosening Program from the drop-down list.
In Reject Management, choose an Action if failure from the drop-down list.
- End all
- Continue OK
To add the bolt configuration, click ADD or ADD MANY. You can have a maximum of 64 bolt configurations.
Choose the relevant Tightening Program from the drop-down list.
Select Sync Mode in the breadcrumbs to return to the list.
The list is updated and the new sync mode is added at the lowest possible position.

Adding a Sync Mode for Loosening

In the Plant Structure window, select a controller from the list.
On the Menu bar, select the Sync Mode tab. The workspace area shows a list of all the current sync modes.
Select the Add command button. The Create a new Mode dialog box opens.
Issue the new Sync Mode with a name and optionally an index number.
In Operation mode, choose Loosening.
Select Add to add the new Sync Mode.
In Properties, issue the Sync Mode with a description.
To add the bolt configuration, click ADD or ADD MANY. You can have a maximum of 64 bolt configurations.
Choose the relevant Tightening Program from the drop-down list.
Select Sync Mode in the breadcrumbs to return to the list.
The list is updated and the new Sync Mode is added at the lowest possible position.