Unassigning an Accessory from a Virtual Station
To unassign an accessory configuration and remove the connection to a virtual station, perform the following steps:
Navigating to Virtual station configuration
In the Plant structure workspace select a controller
. Select the Virtual Station tab
.
The virtual station overview shows a list of virtual stations for the selected controller. The list is empty if no virtual stations have been created.Double-click on a virtual station to open an existing configuration, or click Add to create a new virtual station configuration.
Mark the check box of the accessory configurations that is to be unassigned in the Accessories menu.
Select the Unassign command button in the Accessories menu.
To update the controller with any changes, select the Push changes command button
.
The list in the accessory menu will be updated.
