Creating a Tightening Program
If the list is empty, then no tightening programs have been created. Start by creating a new tightening program:
In the Plant structure
area, select a controller.Go to Tightening program
.The Tightening program overview displays a list of available tightening programs.
Select Add. The Create new Tightening Program window is displayed.
To create a new tightening program, enter the parameters described in the table below .
Select Add. The window closes and the workspace shows the configuration menu where more parameters must be added.
Parameter | Description |
|---|---|
Name | Issue the tightening program with a name in the parameter entry field. |
Index (Tightening program number) | The first free index number is given by default, but any other free number can be assigned to the tightening program. The index number can not be changed at a later stage. Enter an optional index number in the parameter entry field. |
Strategy | Select tightening strategy from the shortcut menu. |
Control strategy | Select from the shortcut menu. Only applicable to certain strategies. |
Target | Select to which final target the tightening shall be performed. Select from the shortcut menu. |
Target | Enter the target value(s) in torque and/or degrees for the tightening step. |
The available strategies depend on the IAM module and the controller software license.
