Working with the Results Tab
ToolsTalk 2 has the capability to show more detailed tightening results than the controller GUI.
Tightening results from the controller are automatically sent from the controller to ToolsTalk 2 as soon as the tightening is finished.
The controller has also the option to send the tightening results to ToolsNet 8 for further processing and statistical analysis.
In ToolsTalk 2 it is possible to view the results and to create reports from one controller at a time. Each task is displayed as one result. A single tightening can show results in a table with key parameters or as a tightening graph. A batch sequence shows all the individual tightenings in the order in which they were performed.
Statistical analysis, result filtering and tightening analysis can be performed using ToolsNet 8. More information on how this is done is described in the ToolsNet 8 documentation.
Icon | Description |
|---|---|
 | The workspace area shows tightening results from the selected controller. The results can be shown both in table format and in graphical traces. |
Results can only be sent and displayed while there is an active connection to the server. If tightenings are performed while the server is offline, then these results will not be transmitted to ToolsTalk 2 during this period.
