General HW error
Name in SoftPLC: CHANNEL_HW_STATUS_GENERAL_ERROR
Value Type | Size Min [bit] | Size Max [bit] |
|---|---|---|
Boolean | 1 | 1 |
Table of Contents
- Introduction
- loading...
- Installation and Upgrade
- loading...
- Configuration
- Getting started
- loading...
- Quality Integrated Fastening Accessories (QIF)
- Working with the Batch Sequence Tab
- loading...
- Working with the Configurations Tab
- loading...
- Working with the Controller Information Tab
- loading...
- Working with the Fieldbus and SoftPLC Tab
- loading...
- Working with the Libraries Tab
- loading...
- Working with Push Configuration Changes
- loading...
- Working with the Settings Tab
- loading...
- Working with the Sources Tab
- loading...
- Working with the StepSync System
- Working with the System Administration Tab
- loading...
- Working with the Tightening Program Tab
- loading...
- Working with the Tools Tab
- loading...
- Working with the Virtual Station Tab
- loading...
- Reports and Statistics
- loading...
- Troubleshooting and Service
- loading...
- Reference
- loading...
Smart Connected Information
