Copying and Pasting a Source Batch or a Source Tightening
Existing Source batches or Source tightenings can be copied and pasted on the same controller, or copied from one controller and then pasted to another.
Copy and Paste are only possible if they are performed on the same controller, or different controllers of the same type and running the same software version.
When you copy an existing Source batch or a Source tightening, any programs and modes associated with the tightening or batch sequence are also copied. These configurations are only copies and can be changed as per requirements.
On the menu bar, select the Sources
tab. The workspace displays a list of available Source batches and Source tightenings.Copy a Source batch or source tightening by either:
Right-clicking on the Source batch or Source tightening to copy, and then choose Copy from the menu.
Or select multiple Source batches or Source tightenings by checking the check boxes in front of each row, right-clicking, and then choose Copy from the menu.
In the Plant Structure
, select the controller to paste the Source to. On the menu bar, select the Sources
tab, and then right-click anywhere in the workspace area and select Paste.
The new Source batch or Source tightening will be issued the first free position in the sequence list. If there are no free slots it will be placed at the bottom of the list and assigned the lowest available index number. It is not possible to change the index number.
