Preferences
The settings menu contains a preferences section, which is used to select language, torque units and PIN protection of the controller interface.
To set controller preferences:
Select a controller in the Plant structure
. Go to Settings
.The workspace area displays the Settings menus.
Parameters for controller preference:
Parameter | Description | Default |
|---|---|---|
Torque unit | Selects the unit in which torque measurement results shall be displayed for this controller in the controller GUI or web GUI. | Nm |
Temperature unit | Selects the unit in which temperature measurement results shall be displayed for this controller in the controller GUI or web GUI. | Celcius |
Language | Selects the language for the controller that shall be displayed for this controller in the controller GUI or web GUI. | English |
Startup screen | Selects the controller startup screen at system start. | Home screen |
Access via factory port | On/Off. Enables (On) or disables (Off) the communication with the controller. | |
Use PIN | A PIN can be enabled for this controller when accessed through the controller GUI or web GUI. | Off |
Pin codes | Select a 4 digit PIN code per added user. Enable/disable user PINs. | |
Inactivity timeout | The controller GUI or web GUI is automatically locked after an activity timeout. | 120 s |
