Copying and Pasting
It is possible to copy and paste:
Tightening Programs
Batch Sequences
Source Batch/Source Tightening
Sync modes
It can be done on the same controller or between controllers of the same type that runs the same software version.
A copy of a program, sequence, batch or source always includes everything as for example attached or associated programs and modes and links.
Examples:
A copy of a tightening program with a loosening program attached > The paste creates a new tightening program and a new loosening program attached.
A copy of a Source Batch > The paste creates a new Source batch with a new Batch Sequence, SynMode (if it is a fixtured system) and Program linked to the new Source Batch.
Select a controller in the plant structure.
Select Tightening Program, Sync Mode, Batch Sequence or Sources. The workspace area shows all the available programs or sequences.
Right-click on a single row or select check boxes for several rows, right click and select Copy.
To paste the copy into the same controller, right-click anywhere in the empty workspace area and select paste. The program, sequence, batch or source is added to the first available position in the existing list.
If there is no space in the list for the copy, the whole operation will fail.
To paste the copy into another controller; select a controller in the plant structure and then select the applicable workspace. Right-click in the workspace and select paste.
It is also possible to paste a copy into the Program Templates library workspace.
Double-click the pasted copy to open and modify it.
