Tightening Program Library - Adding a Global Program to the Distribution List

Select Library in the left-side menu bar.
Go to Tightening Program .

The workspace area shows a list of Global tightening programs.
Use the check box to select one or more programs to be added to the distribution list.
Select Manage and then select Distribute.

The Distribute global configurations dialog window opens.

The left-side column shows the selected Global tightening programs.

The right side column show a list of controllers that are compatible with the selected programs and can be added to the distribution list.
It is only possible to distribute between controllers of the same type and same software versions.
Use the check box to select one or more controllers in the right-side column.

If a controller already subscribes to the selected Global tightening programs it will not show up in the right-side column.
Optional step: Select the down arrow to open additional configurations.
Optional step: Select the action to be taken by ToolsTalk 2 if a global tightening program is changed by the controller GUI or web GUI.
Select Add.

The dialog window is closed.

ToolsTalk 2 can distinguish between a local and a global tightening program, although the controller itself has no knowledge of this. Therefore it is important to specify the action in ToolsTalk 2 if a tightening program is changed via either the controller GUI, or the web GUI. This action is defined in the distribution of a global tightening program in the tightening program library.