Controllers
Controller Types
Apart from the controllers that are supported and configurable using ToolsTalk 2, there is the capability to show other controller types in the Controller List and some limited information about these. The controllers which aren't configurable can launch the relevant software through ToolsTalk 2, where they can be further configured.
The different controller types are represented with an icon in the All Controllers list.
Controller Icon | Controller Type | Compatible Software |
|---|---|---|
| Power Focus 6000 | ToolsTalk 2 |
| PF6 Flex System | ToolsTalk 2 |
| Power Focus 6000 StepSync | ToolsTalk 2 |
| Power Focus 4000 | ToolsTalkPF |
| Power Macs 4000 | ToolsTalkPM |
| Unsupported Controller - A Controller with a higher version and not compatible with the current ToolsTalk 2 release | N/A |
| IXB | ToolsTalk 2 |
Controller Information
The following is an example of the information that a Power Focus 4000, or a Power Macs 4000 controller can display. An Unsupported Controller will not display this information..
Application Boot Software Version
Controller Serial Number
Protocol Version
RBU Serial Number
RBU Type
Software version
Tool Information
The information below is displayed under Tools in ToolsTalk 2. What will be shown here is configured in the respective controller software.
Identifier
Serial Number
Model Type
Service Date
Calibration Date
Tightening Count
Tool Type
Tightenings Since Service
Application Code Version
Boot Code Version
To receive tool information, the controllers will need to be connected to ACDC. For further information please see the ToolsTalk 2 documentation.
