Selector interconnect

Sockets are connected or interconnected through cable connectors at the bottom from below.

All cables are connected before the selector is installed.

Interconnection cables with proper length are available from Atlas Copco. Cable ducts are available along the front and rear and sides of the selector.

Selector cable connections

A

Cable duct

B

Ethernet-in upstream cable to connector

M12 D-coded, female connector in the selector

C

External DC power

Kycon 4 pin male connector in the selector (DC DIN)

D

Ethernet-out downstream cable to connector

M12 D-coded, female connector in the selector

In an application that uses one single wireless selector, no interconnections are needed.