Installation Instructions
WARNINGRisk of Electric Shock
Always disconnect the power source when moving the apparatus or connecting or disconnecting cables.
WARNINGElectric Shock
Use the Atlas Copco original power supply cable. Using an incorrect power supply cable can result in bodily injuries to yourself or others.
Always use an Atlas Copco original power supply cable, if it needs to be replaced.
Always use original parts and accessories approved by Atlas Copco.
Damage to insulations of cables or electrical components may pose life-threatening risks.
When carrying out maintenance on the joining system, always disconnect it from the power supply.
Damaged cables must be replaced immediately, as they increase the risk of electric shock.
Connecting the Power Cable to the Power Supply Unit
Insert the Power Cable into the Power Supply Unit.
Mount the Power Cable retainer to the Power Supply Unit.
Push the Power Cable retainer upwards until it clicks into place underneath the Power Cable.
Connecting the Adapter Cable to the Power Supply Unit
Make sure that the locking mechanism on the Adapter Cable is in open position.
Insert the Adapter Cable into the locking mechanism on the Power Supply Unit.
Twist the locking mechanism into closed position.
Connecting the Adapter Cable to the tool
At the rear of the tool, remove the two screws underneath the tool.
Align the Adapter Cable with the feet of the tool.
Press the front feet on the tool into the front slots on the Adapter Cable.
Slide the front feet on the tool forwards inside the slots.
Press the rear feet on the tool down into the Adapter Cable.
Attach two of the screws provided with the Adapter Cable. Make sure to choose the correct length of the screws.
Required torque = 2Nm
Slide the protective cover over the Adapter Cable into place, so that it covers the bottom plate and the screws.
Connecting the tool to Power Focus 6000
Turn ON the Power Supply Unit.
Pair the tool to the Power Focus 6000, see the Power Focus 6000 User Guide.
Keep The Power Supply Unit always ON while pairing with Power Focus 6000
