Configuring a Wireless Client

On the home view, go to the Settings tab and select Network on the left pane.

On the Wireless Client window, select Edit.

Set Enabled to On.

Set DHCP to On or Off depending on the configuration. If set to Off, fill out the required information, provided by the local system administrator:

• IP address

• Subnet mask

• Gateway

Enter a Network name (SSID).

On the Security window, select Mode and choose a security mode from the list. If WPA2 Personal is chosen, enter a Security key.

Edit the Security settings.

1. Select Mode and choose a security mode from the list.

2. Edit the Security settings as applicable. The available settings depend on which mode is selected.

   Security settings

   Setting	Description
   Mode	Disabled WPA2 Personal WPA2 Enterprise
   EAP Method	PEAP LEAP TLS TTLS FAST
   Security key	Set the alphanumeric password. The minimum length of the security key is 8 characters, and the maximum length is 63 characters.
   Identity	Set the identity of the tool.
   User name	Set the user name.
   Password	Set the password.
   CA-cert	Select the CA certificate with the Browse button. It can be either of PEM format or Binary (DER).
   Client-cert	Select the client certificate with the Browse button. It can be either of PEM format or Binary (DER).
   Private key	Select the private key with the Browse button. It can be either of PEM format or Binary (DER).
   Private key password	Set the password used for the private key.
   Fast PAC	Set the Protected Access Credentials (PAC).
   MSCHAPv2	Set MSCHAPv2 On or Off.

Edit the Optional Settings as applicable.

Select Apply.

The controller will establish a wireless connection to the network.

To access the user interface wirelessly, type the IP address into a web browser.