Configuring the ToolsNet Connection
To connect a controller to ToolsNet and collect tightening results, configure and activate the ToolsNet protocol settings on the controller.
On the Home view, select the Settings Tab. Then, on the left, select Server Connections.
In the ToolsNet window, set the following parameters:
Field
Description
On/Off
Enables/Disables communication with the ToolsNet server
Server port
ToolsNet server port
Server host
ToolsNet server IP address
Encryption
Use TLS encryption for the ToolsTalk communication
Select Apply.
To view the ToolsNet connection status, select the Results icon and go to the Live Results view. Then, select the 
button. In the appearing dialog box, select the Server connections tab.
For information on how to configure ToolsNet, refer to the ToolsNet 8 User Guide.
