Configuring the ToolsTalk Connection

To connect a controller to ToolsTalk, configure and activate the ToolsTalk protocol settings on the controller.

  1. On the Home view, select the Settings Tab. Then, on the left, select Server Connections.

  2. In the ToolsTalk window, set the following parameters:

    Field

    Description

    On/Off

    Enables/Disables communication with the ToolsTalk server

    Server port

    ToolsTalk server port

    Server host

    ToolsTalk server IP address

    Encryption

    Use TLS encryption for the ToolsTalk communication

  3. Select Apply.

To view the ToolsTalk connection status, select the Results icon and go to the Live Results view. Then, select the button. In the appearing dialog box, select the Server connections tab.

For information on how to configure ToolsTalk, refer to the ToolsTalk 2 User Guide.

Relevant Information