1. Power Focus 6000
2. Configuration
3. Working with the Tightening Tab
4. Multistep Programs
5. Multistep GUI Interface

Multistep GUI Interface

While multistep tightening programs can be selected from the controller screen, editing programs can only be done in the web GUI.

Tightening and multistep programs that appear dimmed indicate that they are Global Programs distributed from ToolsTalk. These programs cannot be changed via the controller GUI. Global programs can only be modified through ToolsTalk. Refer to the ToolsTalk user documentation for more information.

The interface for mutistep programs can be divided into three main areas.

On top there is a drop-down menu containing the Properties of the multistep tightening program. Here general properties such as program name, overal program monitor and validation can be filled out.

To the right there are three tabs containing the steps, monitors and restrictions that can be used to build the multistep program. To use any of the items, click on the appropriate tab, and drag the item in the list to the tightening area. Depending on its funtion, either drop the item between the beginning and the end of the program (for steps), or on top of a particular step (for monitors and restrictions).

The main area of the interface is made up of the tightening area. This is the area that includes all the steps in the tightening program.

At bottom left of the screen there are zoom buttons (+ and -), as well as a Delete button. Use the zoom buttons to zoom in and out on the tightening area.