ZC - Zero Crossing
Tools |
|---|
QST |
This monitor calculates the true start of a spring compression.
Parameter | Description |
|---|---|
Trigger Torque | Torque value from where the monitor starts. Must be < End Point Torque. |
End Point Torque | Torque value for stop measuring. Must be > Trigger Torque. |
Start Point Angle | Angle value from where the monitor starts. Must be < End point angle. |
End Point Angle | Angle value for stop measuring. Must be > Start point angle. |
Torque Rate Limit High | Maximum torque rate. Must be > Torque Rate Limit Low and < 999. |
Torque Rate Limit Low | Minimum torque rate. Must be < 999 and < Torque Rate Limit High. |
