1. Power Focus 6000
2. Configuration
3. Working with the Controller Tab
4. Synchronized Tightening
5. Synchronized tightening Signals
6. Output Signals: Sub-signals
7. Channel Hardware Status - 81: Sub-signals
8. Tool Hardware Error

Tool Hardware Error

This sub-signal is set for a collection of health parameters and can indicate any of the following: ToolGround, ToolIndicatorBoard, ToolFanVoltage, ToolAccessoryBusVoltage, ToolParameterFile or ToolTriggerS.

Name in SoftPLC: CHANNEL_HW_STATUS_TOOL_HARDWARE_ERROR