1. Power Focus 6000
  2. Configuration
  3. Working with the Controller Tab
  4. Synchronized Tightening
  5. Synchronized Tightening Signals
  6. Output Signals: Sub-signals
  7. Channel Tightening Status - 80: Sub-signals

Channel Tightening Status - 80: Sub-signals

  • All Signals
  • Cycle Running
  • In Selected Mode
  • Inhibited
  • Last Cycle Angle High
  • Last Cycle Angle Low
  • Last Cycle Hardware Error
  • Last Cycle Inhibited
  • Last Cycle NOK
  • Last Cycle Not Included
  • Last Cycle OK
  • Last Cycle Terminated By Other
  • Last Cycle Timeout
  • Last Cycle Torque High
  • Last Cycle Torque Low
  • Last Loosening NOK
  • Last Loosening OK
  • Last Tightening NOK
  • Last Tightening OK
  • Loosening Running
  • Running Repair
  • Running Termination
  • Tightening Running
  • Tool Led Mirror Green
  • Tool Led Mirror Red
  • Tool Led Mirror Yellow
  • Waiting To Continue

Power Focus 6000 | 3.14 | 8436 1800 02

Published: 2025-03-13

© 2025 Atlas Copco Industrial Technique AB | Legal Notice

Smart Connected Information
  • Download
  • Download All For Offline Use – PC Only
  • Print
  • Print this Topic
  • Print this Section
  • Print All
  • Language
  • US-English (en-US)
  • Language
  • US-English (en-US)
  • Print this Topic
  • Print this Section
  • Print All