1. Power Focus 6000
2. Configuration
3. Working with the Configurations Tab
4. General Virtual Station
5. Configuring Live Result Presentation Settings
6. Show Final Torque with PrT Compensation: OFF / Show PrT Compensation Value: ON

Show Final Torque with PrT Compensation: OFF / Show PrT Compensation Value: ON

Show Final Torque with PrT Compensation: OFF

The Live Result window shows the Final Torque without the PrT compensation value included. Since the Final Torque does not include the PrT compensation value, it shows in italic.

Show PrT Compensation Value: ON

The Live Result window shows the PrT compensation value with the related compensation icon ().

If there are several compensation values, the compensation value applied to the latest available step appears.

Configuring the Show Final Torque with PrT Compensation and Show PrT Compensation Value switches does not impact:

• The final torque values sent to ToolsNet and ToolsTalk: the final torque values with PrT compensation are always sent to ToolsNet and ToolsTalk.

• The final torque value displayed with the historical results.

• The traces based on live and historical results.

• The values in Open Protocol messages.

• The signals.

• The protocol adapters.