Input Message
Options nr 1-11 in the list below are the predefined input messages that can be chosen. To use other messages in ILG, select the Advanced option.
Type | Description |
|---|---|
Entered Position | Entering a position triggers this option. Choose a tool and a position to match. |
External monitored 1 to 8 | Triggers on external monitored I/O. Choose a tool, a group and the matching inputs. |
Left Position | Leaving a position triggers this option. Choose a tool and a position to match. |
Enable Bypass Tool Lock Mode | Will be triggered when the Bypass Tool Lock Mode is enabled. |
Disable Bypass Tool Lock Mode | Will be triggered when the Bypass Tool Lock Mode is disabled. |
Lock tool | Triggers on locking the tool by ILG (not by other sources). Choose a tool to match. |
Process result | The workpiece is finished. Choose a workplace and a result to match. |
Received VIN | ILG received a VIN through OpenProtocol. Choose a tool and a VIN to match. |
Release Tool | Triggers on releasing the tool by ILG (not by other sources). Choose a tool to match. |
Selected Pset | Refers to the pset, which is sent by the controller. Choose a tool and a pset to match. |
Workpiece Running | Triggers on start of a new workpiece. The chosen workplace and workpiece ID must match. |
Advanced | Is only for advanced users, who want to send another internal predefined input message in ILG. |
