ILG Toolbar
ILG software toolbar is a grouping of commands which are optimized for efficient access.
On the left side of the ILG toolbar, the name of the software - Industrial Location Guidance - appears.
On the right side of the ILG toolbar, it is possible to see the connection status. Besides, it is possible to select the software language, the tool which the user can work with, the mode, and the user role.
Connections Statuses
The status of the five different connections is shown by five circle icons. These are, from left to right:
The connection between the user interface (UI) and the ILG back end through a REST API.
The connection between the UI and the ILG back end through a websocket.
The connection between the ILG back end and connected sensors.
The connection between the ILG back end and a tightening controller.
The connection between the ILG back end and IPG.
The fifth connection is only visible if IPG is connected to ILG. If IPG is not connected to ILG, only four connections are listed.
The fourth connection is the only connection that can display three different colors:
White: the connection is OK
Blue: the connection is not OK
Light blue: a license is missing, so a connection can not be made
The connection is OK if the circle icon is white. If the circle icon is blue, the connection is down.
On the left side of the ILG toolbar, hover over the five circle icons to see the connection status.
If the warning icon 
appears, an error has occurred.
Language
On the right side of the ILG toolbar, open the Language drop-down menu and select the necessary language.
The start language is based on the browser language settings. Change the browser settings to the needed language for best user experience.
Tool
On the right side of the ILG toolbar, open the Tool drop-down menu and select the necessary tool.
Mode
On the right side of the ILG toolbar, open the Mode drop-down menu and select one of the available modes: Configuration, Setup, Diagnosis.
The Mode drop-down menu shows also the names of existing Workplaces.
User Role
On the right side of the ILG toolbar, the active User Role is shown: Worker, Configurator, or Service. Select the icon to change between user roles.
The user roles can be configured in Setup mode.
