Start Source
Use the tool start source to set how to start the tool. The default value is Trigger only.
![](../../../assets/img/ac-note-icon-2.png)
Start Source is available only for certain tool types.
Start source | Description |
---|---|
Trigger only | Press the tool trigger to start the tightening. |
Trigger OR Push | Press the tool trigger or push the tool against the joint to start the tightening. |
Trigger AND Push | Press the tool trigger and push the tool against the joint to start the tightening. |
Push only | Push the tool against the joint to start the tightening. |
Digital input | Have a signal using digital input to trigger the start of the tightening. |
Safety trigger | Two triggers (as with trigger and push) activated within 500 ms from each other to start the tightening. |