Settings page
A | Device information | B | Configuration |
C | System log | D | Service port/Factory port |
E | RF | F | Power Focus 6000 connection |
G | Menu bar |
Device information
Serial: serial number of the MWR-KIT. This is a read-only field.
SD-Card: SD-Card status.
Firmware: firmware version of the MWR-KIT.
Click on the Update button to update the MWR-KIT firmware version.
Reset device: click on the Reset button to exit the Configuration mode and restore the Active mode.
When the device is reset, unsaved settings are discarded.
Configuration
Export configuration: click on the Export button to export the MWR-KIT file configuration.
Import configuration: click on the Import button to import the MWR-KIT file configuration.
Restore default configuration: click on the Factory reset button to restore the factory settings.
System log
System log to file: enable/disable the System log to file. The default value is ON.
Telnet log: enable/disable the Telnet log. The default value is ON.
Export system log: click on the Export system log button to export the system log.
Live log: click on the Live log button to show live, log session.
Reset system log: click on the Reset system log button to reset the system log.
Power Focus 6000 Connection
Controller IP: IP address of the controller.
Delay between results [ms]: set a value ranging from 0 to 10000 ms. This parameter allows to assign different timestamp to the results displayed on the Power Focus 6000.
RF
Antenna: set the antenna in use.
Region: set the region of the working channels.
Channel: set the channel of the MWR-KIT communication.
Always update first the communication channel of the MWR, and then the MWR-KIT channel accordingly.
Service port
Service IP: IP address of the MWR-KIT Service port.
By default, the IP address is 169.254.1.1
MAC address: MAC address of the MWR-KIT Service port . This is a read-only field.
Factory port
DHCP: enable/disable the DHCP. The default value is OFF.
IP address: IP address of the MWR-KIT Factory port.
By default, the IP address is 169.254.1.2
Subnet mask: set the subnet mask address.
By default, the IP address is 255.255.0.0
Gateway: set the gateway address.
MAC address: MAC address of the MWR-KIT Factory port. This is a read-only field.
Hostname: insert the hostname of the MWR-KIT .
